Written In Ink

Tag: writtenininkcards

  • Create a Festive Card with Glitter Embossing Techniques

    Create a Festive Card with Glitter Embossing Techniques

    Would you like to experiment with a design like this? You’ll find a supply list below, including a link to the stencil I used from A Colorful Life Designs.  Follow the link and use discount code ChrisFan10 to save 10% on your entire order! (Master Creator Bundles are excluded as they already have a 20% discount built in.)

    Let’s get Started:

    Card Base: 5.5 x 8.5, scored and folded at 4.25

    Border Layer: 5.5 x 4.25

    Card Face: 5.5 x 4

    Card Face:

    • I stamped the tree with Memento Black ink and used alcohol markers to colour it.
    • I outlined the elements on the tree with gray ink to make them stand out from the background.
    • I placed the stencil over the image and pressed my Versamark embossing ink pad firmly over all exposed areas,  going over each area more than once to ensure good coverage.
    • I sprinkled white glitter embossing powder over the surface and set it with my heat gun.

    Other:

    • I looked through my sentiments binder and chose one that fit the mood of the piece and was the correct size.

    Assembly

    • I glued the holographic border layer to the card base, and then glued the card face on top, centering vertically.
    • I added the sentiment as shown,  and then added a small silver pearl to both ends of the sentiment.

    Final Thoughts:

    This is a fun image with a contemporary feel:  after I had coloured it I had a hard time deciding how to finish it off.  In the end, a bit of sparkly snow was the perfect finishing touch.

    Supplies: (and links where possible)

       I have listed which products I have used, and where they may be purchased. It’s a huge marketplace and in most instances, there are multiple sources and many alternatives to choose from.

    Stencil: Falling Snow,  A Colorful Life Designs

    Waffle Flower Grip Mat, 8.5 x 6.5, Scrapbook.com

    Versamark Embossing Ink: Simon Says Stamp

    White Glitter Embossing Powder, Stampin’ Up!

    Stamps: Christmas Town Tree,  Colorado Craft Co.

    Memento Ink: Stampin’ Up! (retired)

    Alcohol Markers:

         Stampin’ Blends: Stampin’ Up!

         Copics:  Wallacks

    Adhesive: Tombow Aqua, Michaels

    Holographic Cardstock:  Reflections,  Michaels

    Card Base & Card Face: Accent 100 lb., Amazon  or  Recollections 110 lb., Michaels

    Do you have comments or thoughts to share on this design?  Drop me a line in the Comments Section below –  I’d love to hear from you!

    You can also use the Comments Section  to be notified when I release new work.

    Falling Snow by a Colorful Life Designs

  • Contemporary DIY Card Design: Stencil Techniques You Need

    Contemporary DIY Card Design: Stencil Techniques You Need

    Would you like to experiment with a design like this? You’ll find a supply list below, including a link to the stencil I used from A Colorful Life Designs.  Follow the link and use the discount code ChrisFan10 to save 10% on your entire order! (Master Creator Bundles are excluded as they already have a 20% discount built in.)

    Let’s get Started:

    Card Base: 5.5 x 8.5, scored and folded at 4.25

    Card Face:  5.5 x 4

    Scrap cardstock for die cut:  4 x 3  (before die cutting)

    Card Face:

    • I sprayed the stencil with Pixie spray and, after about 30 seconds, laid it on the card face.  I rolled over the stencil with a brayer to ensure good contact.
    • I placed the card face-up and stencil in my spray box and sprayed it with Lindy’s Stardust Spray in several colours.

    Other:

    • I used Mint Tape to secure the die to the piece of scrap cardstock and ran it through the Big Shot.
    • I reviewed my sentiment binder and selected one from those I had prepared in advance.

    (This is such a great time saver!)

    Assembly

    • I glued the card face onto the card base,  centering vertically.
    • I affixed the die-cut heart to the card face on the left.
    • I put dimensional foam tape on the back of the sentiment and positioned it as shown.

    Final Thoughts:

    I love the pretty colours and the organic feel of this card.

    Supplies: (and links where possible)

       I have listed which products I have used, and where they may be purchased. It’s a huge marketplace and in most instances, there are multiple sources and many alternatives to choose from.

    Stencil: Wavy Ladders, A Colorful Life Designs

    Waffle Flower Grip Mat, 8.5 x 6.5, Scrapbook.com

    Versamark Embossing Ink: Simon Says Stamp

    Clear Embossing Powder,  Wow,  Simon Says Stamp

    Lindy’s Stardust  Sprays,  Glitter & Ink

    Dies:

    Adhesive: Tombow Aqua, Michaels

    Card Base & Card Face: Recollections 110 lb., Michaels

    Do you have comments or thoughts to share on this design?  Drop me a line in the Comments Section below –  I’d love to hear from you!

    You can also use the Comments Section  to be notified when I release new work.

    Wavy Ladders from A Colorful Life Designs

  • Create Stunning Holiday Cards with Foil Techniques

    Create Stunning Holiday Cards with Foil Techniques

    xx

    Would you like to experiment with a design like this? You’ll find a supply list below, including a link to the stencil I used from A Colorful Life Designs.  Follow the link and use discount code ChrisFan10 to save 10% on your entire order! (Master Creator Bundles are excluded as they already have a 20% discount built in.)

    Let’s get Started:

    Card Base: 5.5 x 8.5, scored and folded at 4.25

    Card Face:  5.5 x 4

    Focal die cut:  3×3 gold foil  (after die cutting)

    Scraps of cardstock for die-cut trees

    Transfer foil cut to 5.5 x 4

    Card Face:

    • I placed the card face onto a piece of scrap paper, positioned the stencil and secured it with Mint Tape.

    I have seen content producers use duo gel/embossing pastes with their Grip Mat, and everything turns out just fine. I don’t like to risk anything drying on my mat,  so I prefer to play it safe and use scrap computer paper.

    • I spread Duo Gel across all exposed areas, carefully removed the stencil, and set the card face down to dry.

    Duo gel dries into a very,very sticky adhesive – so the stencil went into water immediately,  to be scrubbed when my session was over.  This prevents the gel from drying on the stencil – it’s almost impossible to remove at that point.

    • Once the gel had dried, I carefully laid the transfer foil onto the card face and ran it through the Big Shot.   When I removed the foil the sticky Duo  Gel caused the stencilled pattern to stay behind.

    Other:

    • I placed the die onto the gold foil and ran it through the Big Shot.
    • I used two tree dies and the cardstock scraps, combining these with the Big Shot to create the small trees.
    • I looked through my sentiment binder to find a great sentiment for this card.

    Assembly

    I glued the card face onto the card base,  centering vertically.

    I turned the die-cut gold square to create a diamond, and glued that into the center of the card face, and then glued the trees on top of this.

    I positioned the sentiment strip across the center of the card face.

    Final Thoughts:

    This is a very structured card, softened by the foil on the card face.  Between that and the die cut from gold foil, the end result has a lovely shine and shimmer.

    Supplies: (and links where possible)

       I have listed which products I have used, and where they may be purchased. It’s a huge marketplace and in most instances, there are multiple sources and many alternatives to choose from.

    Stencil: Simple Christmas  Trees,  A Colorful Life Design

    Waffle Flower Grip Mat, 8.5 x 6.5, Scrapbook.com

    Versamark Embossing Ink: Simon Says Stamp

    Clear Embossing Powder,  Wow,  Simon Says Stamp

    Dies: Fancy Dies, Square Set,   Hero Arts

    Duo Gel: Deco Foil,  R&R Scrapbooking

    Lapis Watercolor Foil: Deco Foil, Amazon

    Ink: Stampin’ Up!

    Blending Brushes: Stampin’ Up! 

    Adhesive: Tombow Aqua, Michaels

    Cream Card Base & Card Face: Recollections 110 lb., Michaels

    Do you have comments or thoughts to share on this design?  Drop me a line in the Comments Section below –  I’d love to hear from you!

    You can also use the Comments Section  to be notified when I release new work.

    Simple Christmas Trees from A Colorful Life Designs

  • How to Use Duo Gel for Stunning Card Effects

    How to Use Duo Gel for Stunning Card Effects

    Would you like to experiment with a design like this? You’ll find a supply list below, including a link to the stencils I used from A Colorful Life Designs.  Follow the link and use discount code ChrisFan10 to save 10% on your entire order! (Master Creator Bundles are excluded as they already have a 20% discount built in.)

    Let’s get Started:

    Card Base: 5.5 x 8.5, scored and folded at 4.25

    Card Face:  5.25 x 4

    Focal Piece:  2.5 x 1 (after being trimmed down)

    Sentiment: 1.5 x 1.5 (after die cutting)

    Strips:  .25 x 5.25 ( x 2)

    Card Face:

    • I laid the card face onto the grip mat and positioned the Mod Rectangles stencil.
    • I applied red ink over all exposed areas,  deepening the colour at the edges to create a border.
    • After removing the first stencil, I placed the Airy Swirls stencil.
    • I covered all exposed areas with Duo Gel, removed the stencil carefully (to avoid smudges), and put the card face down to dry.
    • Once the gel was dry (it goes on white but becomes clear when dry), I laid a piece of transfer foil on top and ran it through the Big Shot.  When I removed the piece of foil, the sticky gel had left those areas of the foil in place, creating the stencilled pattern.

    When I use Duo Gel, the stencils go immediately into water once removed as the gel will be almost impossible to get off when dry.

    Other:

    • I placed the cardstock for the focal image into my stamp positioner and added the image of the woman with brown ink.  I used my trimmer to cut this to size along the dotted border, finishing with a corner punch to round the edges.
    • I replaced this with the smaller piece of cardstock for the sentiment, stamped it with the same brown ink, then cut it down to size with a die.

    Assembly

    • I centered the card face on the card base,  and then added the focal piece towards the left as shown.I glued the two narrow strips to the right of this image.
    • I added dimensional foam to the back of the sentiment and placed it as shown, allowing it to slightly overlap the focal image.   I added three small gold pearls at the bottom of this piece.

    Final Thoughts:

    Purple and red are a fabulous colour combination, and they work well with this pair of stencils: one so structured and the other so loose and flowing.   

    This created a fun backdrop for the tongue-in-cheek, vintage focal image.

    Supplies: (and links where possible)

       I have listed which products I have used and where they may be purchased. It’s a huge marketplace, and in most instances, there are multiple sources and many alternatives to choose from.

    Stencils

    Mod Rectangles,  A Colorful Life Designs

    Airy Swirls: A Colorful Life Designs:

    Waffle Flower Grip Mat, 8.5 x 6.5, Scrapbook.com

    Stamps: Motherhood is a Verb,  Unity Stamps  (retired)

    Ink: Stampin’ Up!

    Blending Brushes: Stampin’ Up! 

    Duo Gel: Decofoil,  R&R Scrapbooking

    Transfer Foil: Decofoil,  R&R Scrapbooking

    Adhesive: Tombow Aqua, Michaels

    Card Base & Card Face: Accent 100 lb., Amazon

    Do you have comments or thoughts to share on this design?  Drop me a line in the Comments Section below –  I’d love to hear from you!

    You can also use the Comments Section  to be notified when I release new work.

    Mod Rectangles by A Colorful Life Designs

    Airy Swirls by A Colorful Life Designs

  • Create Stunning Cards with Stencils & Embossing Paste

    Create Stunning Cards with Stencils & Embossing Paste

    Would you like to experiment with a design like this? You’ll find a supply list below, including a link to the stencil I used from A Colorful Life Designs.  Follow the link and use discount code ChrisFan10 to save 10% on your entire order! (Master Creator Bundles are excluded as they already have a 20% discount built in.)

    Let’s get Started:

    Card Base: 5.5 x 8.5, scored and folded at 4.25

    Card Face:  5.5 x 4

    Focal Image Strip:  5.5 x 1.75”

    Sentiment strip: .25” x 4

    Card Face:

    • I laid the card face onto the Grip Mat and positioned the Diamond Lattice stencil.  
    • I applied brown ink across all exposed areas, allowing variation in tone to provide depth and visual interest.
    • I applied DIY embossing paste randomly over the card face.  I carefully removed the stencil and put the card face aside to dry.  

    When I use embossing paste the stencil goes into water immediately to prevent the paste from drying on the stencil. This makes clean-up much faster and easier.

    • Once the paste had dried, I used the Grunge Dots stencil to add dots here and there in the remaining inked portions of the pattern.

    Other:

    • I placed the Focal Image strip into my stamp positioner and added the leaves with dark brown ink,  stamping several times to get an intense image.
    • I sprinkled clear embossing powder over the image,  setting it with my heat gun.
    • Next I placed the narrow sentiment strip in the stamp positioner and stamped the sentiment with the same dark brown ink,  again stamping multiple times to get intense colour.
    • I sprinkled this with clear embossing powder too, and set it with my heat gun.

    Although I used a dye based ink for both of these,  stamping several times created enough saturation that the ink was wet enough for me to use the embossing powder successfully. Stamping only once wouldn’t have worked, as the ink would have dried too quickly.

    Assembly

    • I glued the card face onto the card base, and then added the strip with the leaves, centering both vertically.
    • I put dimensional foam on the back of the sentiment and then added it to the card face, centering horizontally.

    Final Thoughts:

    The combination of ink and embossing paste work well with this design,  and the addition of the dots provided additional depth and visual interest.

    Supplies: (and links where possible)

       I have listed which products I have used, and where they may be purchased. It’s a huge marketplace and in most instances, there are multiple sources and many alternatives to choose from.

    Stencil: 

    Diamond Lattice,  A Colorful Life Designs

    Grunge Dots,  A Colorful Life Designs

    Waffle Flower Grip Mat, 8.5 x 6.5, Scrapbook.com

    Versamark Embossing Ink: Simon Says Stamp

    Clear Embossing Powder,  Wow,  Simon Says Stamp

    Stamps: Falling Hearts,  Unity Stamps  (retired)

    Ink: Stampin’ Up!

    Blending Brushes: Stampin’ Up! 

    Adhesive: Tombow Aqua, Michaels

    Card Base & Card Face: Accent 100 lb., Amazon

    Do you have comments or thoughts to share on this design?  Drop me a line in the Comments Section below –  I’d love to hear from you!

    You can also use the Comments Section  to be notified when I release new work.

    Diamond Lattice by A Colorful Life Designs

    Grunge Dots by A Colorful Life Designs

  • Beautiful Multi-Color Stenciling for Card Making

    Beautiful Multi-Color Stenciling for Card Making

    Would you like to experiment with a design like this? You’ll find a supply list below, including a link to the stencil I used from A Colorful Life Designs.  Follow the link and use discount code ChrisFan10 to save 10% on your entire order! (Master Creator Bundles are excluded as they already have a 20% discount built in.)

    Let’s get Started:

    Card Base: 5.25 x 10.5, scored and folded at 5.25

    Card Face:  5 x 5

    Sentiment Strip:  5 x 1.5”

    Card Face:

    • I laid the card face on a piece of scrap paper and positioned the stencil (this is a 6 x 9 stencil,  so there are options how how to place it – even on a 5 x 5 card face), and secured it with Mint Tape.
    • Using small blending and shading brushes,   I applied colours to the stencil.  I used orange on the  center of the flowers , then, moved to a dark red, then to pink.  I finished the background with soft beige.
    • I spattered the card face using metallic gold watercolour.
    • I ran all edges over a Versafine Onyx ink pad, adding definition to the card face.

    Other:

    • I placed the strip of card stock into the stamp positioner and added the sentiment with Versafine Onyx.  I ran the two horizontal edges of the strip over the black ink pad.

    Assembly

    • I glued the card face onto the card base, centering on all sides.
    • I added dimensional foam to the back of the card strip and centered it horizontally on the card face.

    Final Thoughts:

    This is a really pretty stencil to play with,  and the options for colour are endless –  everything from monochromatic to full colour, as I have chosen here.

    I’m really happy with the result of this multi-colour stencilling,  but it was absolutely necessary to use smaller brushes to control colour placement.

    Supplies: (and links where possible)

       I have listed which products I have used, and where they may be purchased. It’s a huge marketplace and in most instances, there are multiple sources and many alternatives to choose from.

    Stencil: Lace Close Up, A Colorful Life Designs

    Waffle Flower Grip Mat, 8.5 x 6.5, Scrapbook.com

    Stamps:  Technique Junkies  (no longer in business)

    Ink: Stampin’ Up!

    Blending Brushes: Sampler Pack, Waffle Flower, R&R Scrapbooking

    Versafine Onyx, Simon Says Stamp

    Adhesive: Tombow Aqua, Michaels

    Card Base & Card Face: Accent 100 lb., Amazon

    Do you have comments or thoughts to share on this design?  Drop me a line in the Comments Section below –  I’d love to hear from you!

    You can also use the Comments Section  to be notified when I release new work.

    Lace Close Up by A Colorful Life Designs

  • Fast, Distinctive and Contemporary makes a great holiday card

    Fast, Distinctive and Contemporary makes a great holiday card

    Black is an unusual choice for a holiday card, but so distinctive!

    Would you like to experiment with a design like this? You’ll find a supply list below, including a link to the stencil I used from A Colorful Life Designs.  Follow the link and use discount code ChrisFan10 to save 10% on your entire order! (Master Creator Bundles are excluded as they already have a 20% discount built in.)

    Let’s get Started:

    Card Base: 5.5 x 8.5, scored and folded at 4.25

    Card Face:  5 ⅛ x 3 7/8

    Card Face:

    • I laid the black card face onto the Grip Mat and positioned the stencil.  
    • I pressed my Versamark embossing ink pad firmly into the openings, moving as needed and covering the entire surface twice to ensure good coverage.
    • After removing the stencil I sprinkled clear embossing powder over the card face, setting it with my heat gun.

    Other:

    • I looked through my “someday” binder, and struck gold with both the houses and the snowflakes.  
    • Then I looked through my sentiment binder and selected the one you see in the photo –  it worked well with the design.

    Assembly

    • I glued the strip with the houses to the bottom of the card face.
    • I glued the sentiment into (approximately) the center of the card face.
    • I added the snowflakes to the sky as shown, then placed a pearl in the center of each snowflake.
    • I glued the card face to the card base, centering on all sides.

    Final Thoughts:

    I love a card that has a hidden surprise, as this one does.  Seen from the front, it’s a simple scene of houses in snowfall; however, when you tilt it just slightly, the light catches the clear heat embossing, revealing the stencilled pattern.

    Supplies: (and links where possible)

       I have listed which products I have used, and where they may be purchased. It’s a huge marketplace and in most instances, there are multiple sources and many alternatives to choose from.

    Stencil: Christmas Montage,  A Colorful Life Designs

    Waffle Flower Grip Mat, 8.5 x 6.5, Scrapbook.com

    Versamark Embossing Ink: Simon Says Stamp

    Clear Embossing Powder,  Wow,  Simon Says Stamp

        Adhesive: Tombow Aqua, Michaels

    Card Base & Card Face: Accent 100 lb., Amazon

    Do you have comments or thoughts to share on this design?  Drop me a line in the Comments Section below –  I’d love to hear from you!

    You can also use the Comments Section  to be notified when I release new work.

    Christmas Montage by A Colorful Life Designs

  • Create Beautiful Christmas Cards with Cardinals

    Create Beautiful Christmas Cards with Cardinals

    Would you like to experiment with a design like this? You’ll find a supply list below, including a link to the stencil I used from A Colorful Life Designs.  Follow the link and use discount code ChrisFan10 to save 10% on your entire order! (Master Creator Bundles are excluded as they already have a 20% discount built in.)

    Let’s get Started:

    Card Base: 5.25 x 10.5,  scored and folded at 5.25

    Cream Border Layer: 5. X 5

    Red Border Layer  4 x 4

    Card Face: 3.75 x 3.75

    Scraps of cream and red cardstock for the banner and birds

    Card Face:

    • I laid the card face down onto scrap paper and positioned the stencil.  I applied green embossing paste to all exposed areas.
    • I removed the stencil carefully and put it into water immediately (to prevent the paste from drying on the surface).  
    • I put the card face aside to dry.  Once dry,  I used a corner punch on each corner, which created both the rounded edge and the peek-a-boo slot in the card face.

    Other:

    • I die-cut the banner 2x from cream cardstock and once from red.
    • I glued the two cream banners together, then added the red one behind, offsetting it just slightly.
    • I die-cut the tiny cardinals from the same red cardstock.
    • I put the banner in my stamp positioner and stamped Merry Christmas in red ink.
    • I put the cream border into an embossing folder and ran it through my Big Shot.

    Assembly

    • I glued the embossed, cream border to the card base, centering it on all sides.
    • I glued the card face to the red border layer, again centering it on all sides.
    • I glued these two layers together, again (of course!) centering on all sides.
    • I glued the banner into the center of the wreath.
    • I added the tiny cardinals as shown.

    Final Thoughts:

    I had such a time with that banner!   The first time I tried to glue it down I hadn’t allowed enough time for the ink to dry and smudged the red in the process.  The second attempt, I had glue on my finger, touched the red ink … and of course smudged it again.   At that point I put it aside for a couple of days –  I was tired of looking at it!

    When I returned to it I once again die cut a banner and stamped it, and very carefully glued it on top of what was there …  and I finally managed to get the task done without smudging it!

    Luckily,  I like the result, LOL.  The embossing paste has a lovely gleam and creates a wonderful backdrop for the banner and birds.

    Supplies: (and links where possible)

       I have listed which products I have used, and where they may be purchased. It’s a huge marketplace and in most instances, there are multiple sources and many alternatives to choose from.

    Stencil: Leaf Frame,  A Colorful Life Designs

    Waffle Flower Grip Mat, 8.5 x 6.5, Scrapbook.com

    Embossing Paste:  Later Gator Lunar Paste, Glitter & Ink

    Stamp & Die: Banner Sentiments, Penny Black, Teaspoon of Fun

    Ink: Stampin’ Up!

    Adhesive: Tombow Aqua, Michaels

    Cream Card Base & Card Face: Recollections 110 lb., Michaels

    Do you have comments or thoughts to share on this design?  Drop me a line in the Comments Section below –  I’d love to hear from you!

    You can also use the Comments Section  to be notified when I release new work.

    Leafy Frame by A Colorful Life Designs