Written In Ink

Tag: handmadecard

  • Make a Christmas card with a masculine twist

    Make a Christmas card with a masculine twist

    Would you like to experiment with a design like this? You’ll find a supply list below, including a link to the stencil I used from A Colorful Life Designs.  Follow the link and use discount code ChrisFan10 to save 10% on your entire order! (Master Creator Bundles are excluded as they already have a 20% discount built in.)

    Let’s get Started:

    Card Base: 5.5 x 8.5, scored and folded at 4.25

    Black Border Layer: 5.5 x  4.25

    Card Face:  5.5 x 4

    Scrap of Kraft Cardstock 3 x 2

    Small Black border layer: 3 x 2 3/16

    Black Strips:  4 x 3/19  (three of them)

    This stencil has long strands which are unsecured between the top and bottom – a recipe for unwanted movement while applying ink. Before starting I sprayed the back of the stencil with Pixie Spray, and waited about 30 seconds before proceeding.

    Card Face:

    • I laid the card face on my Grip Mat and positioned the stencil.  I applied metallic gold ink across the exposed areas.

    Other:

    • I placed the scrap of kraft cardstock into my stamp positioner and added the tree with Versafine Onyx.  I stamped a couple of times to ensure a very bold image.
    • Once the ink had dried,  I placed this in an embossing folder and ran it through the Big Shot.

    Assembly

    • I glued the black border to the card base.
    • I glued the card face to the border layer, centering vertically.
    • I glued the three narrow strips to the card face, evenly spaced.
    • I glued the embossed/stamped layer to the smaller black border, centering vertically.
    • I put dimensional foam on the back of this smaller piece,  and positioned it in the center of the card face.

    Final Thoughts:

    This is clearly a masculine card:  this is determined by the shapes and colours used.  There is nothing in the design or the focal image that indicates that this has to be for a male… and yet that is the only real choice.

    Supplies: (and links where possible)

       I have listed which products I have used, and where they may be purchased. It’s a huge marketplace and in most instances, there are multiple sources and many alternatives to choose from.

    Stencil: Drizzled Lines,  A Colorful Life Designs

    Waffle Flower Grip Mat, 8.5 x 6.5, Scrapbook.com

    Stamps:  Christmas Tree of Hope, Joy and Love, Unity Stamps (retired)

    Lisa Horton Metallic Gold Ink: Glitter & Ink

    Blending Brushes: Stampin’ Up! 

    Versafine Onyx, Simon Says Stamp

    Adhesive: Tombow Aqua, Michaels

    Card Base & Card Face: Accent 100 lb., Amazon

    Do you have comments or thoughts to share on this design?  Drop me a line in the Comments Section below –  I’d love to hear from you!

    You can also use the Comments Section  to be notified when I release new work.

    Drizzled Lines by A Colorful Life Designs

  • Create Your Own Snowman Card with Easy Techniques

    Create Your Own Snowman Card with Easy Techniques

    There is nothing this wee fella loves more than a good snowfall.

    Would you like to experiment with a design like this? You’ll find a supply list below, including a link to the stencil I used from A Colorful Life Designs.  Follow the link and use discount code ChrisFan10 to save 10% on your entire order! (Master Creator Bundles are excluded as they already have a 20% discount built in.)

    Let’s get Started:

    Card Base: 5.5 x 8.5, scored and folded at 4.25

    Card Face: 5.5 x 4.25 (before die cutting)

    White Cardstock for die cutting:  4 x 4

    Card Face:

    • I laid the card face on my Grip Mat and positioned the stencil.
    • I used ink that matched the cardstock across all open areas,  using a heavy hand to get a saturated result.
    • I removed the stencil and sprinkled clear embossing powder over the wet ink, immediately setting this with my heat gun.
    • I used a deckled rectangle die to cut the card face down to approximately 5.25 x 4”.

    Other:

    • I positioned the square die on the smaller piece of white cardstock and ran it through my Big Shot.
    • I looked through my Ready to Go binder and selected the wee snowman, which had already been coloured and cut out.
    • I checked my sentiment binder and selected one that worked with the design.

    Assembly

    • I glued the card face to the card base.
    • I centered the die-cut square on the card face and glued it down.
    • I added the snowman towards the bottom right.
    • I added the sentiment across the snowman.

    Final Thoughts:

    This is a fun and festive card to celebrate the season.

    When I cut out the snowman  I cut tight along the outer lines and cut off the arms  (they are so thin and delicate that  cutting them out would be very time-consuming.)   I rectified this by using a fineliner to draw them back on once I had the snowman glued to the die cut square.  I got this tip from a Jennifer McGuire video, and use it often.

    Supplies: (and links where possible)

       I have listed which products I have used, and where they may be purchased. It’s a huge marketplace and in most instances, there are multiple sources and many alternatives to choose from.

    Stencil: Christmas Words, A Colorful Life Designs

    Waffle Flower Grip Mat, 8.5 x 6.5, Scrapbook.com

    Versamark Embossing Ink: Simon Says Stamp

    Clear Embossing Powder,  Wow,  Simon Says Stamp

    Stamps: A Colorful Life Designs (retired)

    Dies: Your Next Stamp  (no longer in business)

    Ink: Stampin’ Up!

    Blending Brushes: Stampin’ Up! 

    Versafine Onyx, Simon Says Stamp

    Memento Ink: Stampin’ Up!

    Alcohol Markers:

         Stampin’ Blends: Stampin’ Up!

         Copics:  Wallacks

    Adhesive: Tombow Aqua, Michaels

    Card Base & Card Face: Accent 100 lb., Amazon

    Do you have comments or thoughts to share on this design?  Drop me a line in the Comments Section below –  I’d love to hear from you!

    You can also use the Comments Section  to be notified when I release new work

    Christmas Words by A Colorful Life Designs

  • Making Cards or Making Mischief ? sometimes you can have both!

    Making Cards or Making Mischief ? sometimes you can have both!

    Peaceful & calm outside, but inside? Mischief and mayhem!

    Would you like to experiment with a design like this? You’ll find a supply list below, including a link to the stencils I used from A Colorful Life Designs.  Follow the link and use discount code ChrisFan10 to save 10% on your entire order! (Master Creator Bundles are excluded as they already have a 20% discount built in.)

    Let’s get Started:

    Card Base: 5.5 x 8.5, scored and folded at 4.25

    Card Face: 5.5 x 4.25

    Card Face:

    • I stamped the trees roughly in the center of the paper using Memento black ink. I coloured the trees with alcohol markers.
    • I placed the card face onto the grip mat, and then added one of the Arches stencils,  centering the opening around the trees.  
    • Using a light hand, I added blue ink in the open areas.
    • I added snow to the scene by spattering white metallic watercolour into the opening, directly over the image.
    • I removed the Arches stencil and placed the Floor Perspective stencil towards the bottom of the card face, immediately under the window.   I used brown ink across the open areas.   I wanted to continue the floor pattern across the entire width of the card face, so I moved the stencil to the right and tried to line up the pattern before applying ink again. (you can see that I was not entirely successful!)  I repeated this on the left side of the card face, extending the tiled floor there as well.
    • I protected the window image created earlier by adding the corresponding mask to cover the inked area completely.  I used a loop of low-tack tape on the back of the mask to keep it in place.  
    • Using a strip of low tack tape to mask the edge of the floor,  I added yellow ink to the top of the card face around the window.
    • I put the Sparkles stencil in place and added the same yellow ink across the exposed areas, creating a tone on tone pattern.
    • I added light grey ink to the border area between the floor and wall to create shadow.
    • I put the mask back in place over the window and traced around this with a black marker.   I used a ruler and the same black marker to create the window panes within this border.

    Other:

    • I had previously stamped and coloured the image of the dog with the string of lights:  I fussy cut around the image.  To give this just a bit more “pop”  I used a clear medium over the Christmas bulbs –  this added a bit of depth and a lot of shine.
    • I looked through my sentiment binder and found one that worked perfectly with the scene.

    Assembly

    • I glued the card face to the card base.
    • I glued the dog in place.
    • I added the sentiment across the center of the trees.

    Final Thoughts:

    Supplies: (and links where possible)

    This card involved a lot of design on the fly …. I started the process with the idea of using the Arches stencil, and no real plan. It created itself as I went along (something that happens often in my craftroom), and once I had added the floor, wallpaper and outlined the window I thought the card was done.

    When I went back and had another look the following week, I realized it still needed “something”. So I looked through my pre-coloured images and discovered the perfect final touch.

    I love it when serendipity strikes!

    Supplies:

       I have listed which products I have used, and where they may be purchased. It’s a huge marketplace and in most instances, there are multiple sources and many alternatives to choose from.

    Stencils:

    Marvellous Masks Arches,  A Colorful Life Designs

    Floor Perspective, A Colorful Life Designs

    Sparkles, A Colorful Life Designs

    Waffle Flower Grip Mat, 8.5 x 6.5, Scrapbook.com

    Versamark Embossing Ink: Simon Says Stamp

    Clear Embossing Powder,  Wow,  Simon Says Stamp

    Stamps: 

    Dog:  Christmas Fun,  Penny Black,  Amazon

    Trees: Impression Obsession (no longer in business)

    Ink: Stampin’ Up!

    Blending Brushes: Stampin’ Up! 

    Versafine Onyx, Simon Says Stamp

    Memento Ink: Stampin’ Up!

    Alcohol Markers:

         Stampin’ Blends: Stampin’ Up!

         Copics:  Wallacks

    Adhesive: Tombow Aqua, Michaels

    Card Base & Card Face: Accent 100 lb., Amazon

    Do you have comments or thoughts to share on this design?  Drop me a line in the Comments Section below –  I’d love to hear from you!

    You can also use the Comments Section  to be notified when I release new work

    Marvellous Masks Arches by A Colorful Life Designs

    Sparkles by A Colorful Life Designs

    Floor Perspective by A Colorful Life Designs

  • Autumn Card Design Tips with A Colorful Life Stencils

    Autumn Card Design Tips with A Colorful Life Stencils

    Snuggling up and getting cozy when autumn bring chilly winds … bliss!

    Would you like to experiment with a design like this? You’ll find a supply list below, including a link to the stencils I used from A Colorful Life Designs.  Follow the link and use discount code ChrisFan10 to save 10% on your entire order! (Master Creator Bundles are excluded as they already have a 20% discount built in.)

    Let’s get Started:

    Card Base: 5.5 x 8.5, scored and folded at 4.25

    Card Face:  5.5 x 4.25

    Card Face:

    • I laid this piece on the Grip Mat and then positioned the stencil. 
    •  Using a soft hand, I applied a mixture of brown, yellow and green inks across the open areas.  
    •    Tip: Adding just a touch of extra colour to the edges created the look of a shadow and provided additional dimension.
    • I decided to add the Windy Day stencil to represent the chilly winds of autumn: I positioned this stencil so that it would extend from the left-hand side of the focal image, and applied light blue ink to create the pattern.
    • I selected a different portion of the stencil and added the pattern after positioning it to be added to the bottom right-hand corner of the card.
    • I added spatter to the card face using both plain water and metallic copper watercolour paint.

    Other:

    • I stamped the image using Memento ink, and coloured it with alcohol markers.
    • Once the colouring was complete, I fussy cut the image with my snips.
    • I stamped the sentiment using brown ink, and cut it out with a small oblong die.

    Assembly

    • I glued the card face to the card base.
    • I glued the focal image into the center of the card face.
    • I added the sentiment as shown.

    Final Thoughts:

    I love House Mouse stamps –  they are so deliciously whimsical.   I loved spending time colouring this one and then using it on a card. I decided to colour the leaf in the bright colours of autumn, despite the fact that this  kind of leaf would not actually have those colours in real life.  Artistic licence!

    Supplies: (and links where possible)

       I have listed which products I have used, and where they may be purchased. It’s a huge marketplace and in most instances, there are multiple sources and many alternatives to choose from.

    Stencils:

        Windy Day,  A Colorful Life Designs

        Fall Leaves, A Colorful Life Designs

    Waffle Flower Grip Mat, 8.5 x 6.5, Scrapbook.com

    Stamps:   Snuggle Up- House Mouse, Spellbinders, Frantic Stamper

    Dies: Ornate Labels, Sizzix, Amazon

    Metallic Watercolour:  Amazon

    Ink: Stampin’ Up!

    Blending Brushes: Stampin’ Up! 

    Memento Ink: Stampin’ Up!

    Alcohol Markers:

         Stampin’ Blends: Stampin’ Up!

         Copics:  Wallacks

    Adhesive: Tombow Aqua, Michaels

    Card Base & Card Face: Accent 100 lb., Amazon

    Do you have comments or thoughts to share on this design?  Drop me a line in the Comments Section below –  I’d love to hear from you!

    You can also use the Comments Section  to be notified when I release new work

    Fall Leaves by A Colorful Life Designs

    Windy Day by A Colorful Life Designs

  • Touch his heart with a card he is sure to treasure

    Touch his heart with a card he is sure to treasure

    Would you like to experiment with a design like this? You’ll find a supply list below, including a link to the stencil I used from A Colorful Life Designs.  Follow the link and use discount code ChrisFan10 to save 10% on your entire order! (Master Creator Bundles are excluded as they already have a 20% discount built in.)

    Let’s get Started:

    Card Base: 5.5 x 8.5, scored and folded at 4.25

    Kraft Border:  5.5 x 4.25

    Black Border:  5.25 x 4

    Kraft Card Face:  5 ⅛ x 3 7/8

    Card Face:

    • I laid the card face onto my grip mat and positioned the stencil at an angle, extending off  the right-hand side.
    • I went over the exposed areas with red ink and then added another layer of ink to the outer edges, using a darker cranberry red.  
    • I placed the card face into my stamp positioner and added the sentiment with Versafine Onyx, stamping it two or three times to achieve a dark, clear image.

    Other:

    • I used a separate scrap of kraft cardstock for the tree. After placing it in the stamp positioner, I stamped the green leaves on the tree, carefully masking off the trunk.  I stamped twice to get the depth of colour I wanted,  masking both times to protect the trunk.
    • I repeated these steps to stamp the trunk, using brown ink,  stamping twice for the desired saturation and protecting the leaves both times by masking.
    • I used the matching die to cut this out.

    Assembly

    • I glued the kraft border to the card base.
    • I added the black border and the card face on top of these, centering both times.
    • I glued the tree in place.

    Final Thoughts:

    I really like this combination:  kraft cardstock produces such a different “feel”,  and the elements in this card work well with that.

    This masculine card would work for birthdays, a graduation, a new job – almost any occasion.

    Supplies: (and links where possible)

       I have listed which products I have used, and where they may be purchased. It’s a huge marketplace and in most instances, there are multiple sources and many alternatives to choose from.

    Stencil:  Leafy Heart Frame, A Colorful Life Designs

    Waffle Flower Grip Mat, 8.5 x 6.5, Scrapbook.com

    Stamps & Die:  Rooted in Nature, Stampin’ Up!  (retired)

    Ink: Stampin’ Up!

    Blending Brushes: Stampin’ Up! 

    Versafine Onyx, Simon Says Stamp

    Adhesive: Tombow Aqua, Michaels

    Card Base & Card Face: Accent 100 lb., Amazon

    Do you have comments or thoughts to share on this design?  Drop me a line in the Comments Section below –  I’d love to hear from you!

    You can also use the Comments Section  to be notified when I release new work

    Leafy Heart Frame by A Colorful Life Designs

  • A simple & elegant – and sincere! – thank you card

    A simple & elegant – and sincere! – thank you card

    Would you like to experiment with a design like this? You’ll find a supply list below, including a link to the stencil I used from A Colorful Life Designs.  Follow the link and use discount code ChrisFan10 to save 10% on your entire order! (Master Creator Bundles are excluded as they already have a 20% discount built in.)

    Let’s get Started:

    Card Base: 5.5 x 8.5, scored and folded at 4.25

    Card Face:  5.5 x 4.25

    Card Face:

    • I placed the card face on the Grip Mat and positioned the stencil.
    • I applied metallic silver ink across all exposed areas.
    •      Although I routinely use blending brushes for dye inks,  I use blending foams for pigment/metallic inks.   This is mostly because I have a supply of foams (from my pre-brush era) and I want to have a dedicated foam to each colour of metallic/pigment ink.)
    • After removing the stencil I placed the card face into the stamp positioner and added the sentiment with Versafine Onyx.
    • I used the edge of the ink pad to apply a narrow border of silver ink to all edges of the card face.

    Assembly

    • I glued the card face to the card base.

    Final Thoughts:

    I needed a simple but elegant thank you card –  this duet more than met the challenge!

    Supplies: (and links where possible)

       I have listed which products I have used, and where they may be purchased. It’s a huge marketplace and in most instances, there are multiple sources and many alternatives to choose from.

    Stencil: Filigree Leaf Stencil, A Colorful Life Designs

    Stamps:  Simply Sentimental,  Trinity Stamps

    Waffle Flower Grip Mat, 8.5 x 6.5, Scrapbook.com

    Ink: Metallic Ink- Lisa Horton, Glitter & Ink

    Blending Tool:  Studio Light, Ecstasy Crafts

    Versafine Onyx, Simon Says Stamp

    Adhesive: Tombow Aqua, Michaels

    Card Base & Card Face: Accent 100 lb., Amazon

    Do you have comments or thoughts to share on this design?  Drop me a line in the Comments Section below –  I’d love to hear from you!

    You can also use the Comments Section  to be notified when I release new work

    Filigree Leaf by A Colorful Life Designs

  • Simple Moments Become Treasured Memories

    Simple Moments Become Treasured Memories

    Would you like to experiment with a design like this? You’ll find a supply list below, including a link to the stencil I used from A Colorful Life Designs.  Follow the link and use discount code ChrisFan10 to save 10% on your entire order! (Master Creator Bundles are excluded as they already have a 20% discount built in.)

    Let’s get Started:

    Card Base: 5.5 x 8.5, scored and folded at 4.25

    Card Face:  5 3/8 x 4 1/8

    Card Face:

    • I laid the card face onto the Grip Mat and applied green and blue ink with a soft hand. 
    • I placed the stencil over the card face and used a variety of dark and medium green inks over the exposed areas.
    • I moved the card face to the stamp positioner and added the image with Versafine Onyx.
    • I intensified the blue around the edges, which adds to the sense of looking into a scene.
    • I spattered the card face with white metallic watercolour .

    Other:

    • I stamped the sentiment on a piece of scrap cardstock and cut it out with a punch.
    • I cut two additional “blanks” with the punch.

    Assembly

    • I glued the three punched shapes together,  with the sentiment on top.
    • I glued the card face to the card base, and added the sentiment as shown.

    Final Thoughts:

    I love the soft colours with the gentle feel and sentiment used on this card.  

    Supplies: (and links where possible)

       I have listed which products I have used, and where they may be purchased. It’s a huge marketplace and in most instances, there are multiple sources and many alternatives to choose from.

    Stencil: Falling Leaves,  A Colorful Life Designs

    Stamp:  Stampin’ Up! (retired)

    Waffle Flower Grip Mat, 8.5 x 6.5, Scrapbook.com

    Metallic Watercolour: Amazon 

    Ink: Stampin’ Up!

    Blending Brushes: Stampin’ Up! 

    Versafine Onyx, Simon Says Stamp

    Adhesive: Tombow Aqua, Michaels

    Card Base & Card Face: Accent 100 lb., Amazon

    Do you have comments or thoughts to share on this design?  Drop me a line in the Comments Section below –  I’d love to hear from you!

    You can also use the Comments Section  to be notified when I release new work

    Falling Leaves by A Colorful Life Designs

    cc

  • Gotta tackle that To-Do list… but first COFFEE

    Gotta tackle that To-Do list… but first COFFEE

    “gotta have my coffee!” – the morning anthem of much of the world

    Would you like to experiment with a design like this? You’ll find a supply list below, including a link to the stencil I used from A Colorful Life Designs.  Follow the link and use discount code ChrisFan10 to save 10% on your entire order! (Master Creator Bundles are excluded as they already have a 20% discount built in.)

    Let’s get Started:

    Card Base: 5.5 x 8.5, scored and folded at 4.25

    Border Layer 5.5  x 4 1/8

    Card Face:  5.5 x 4 

    Card Face:

    • I laid the card face onto my Grip Mat and then positioned the stencil, offsetting the design to the left.
    • I used brown ink and a light hand to go over all exposed areas.
    • Working one row at a time, I masked half of each circle with a piece of paper, and once again went over exposed areas with brown ink and a light hand.  This made each circle two-toned, and provided additional visual interest.
    • I put the card face into my stamp positioner and added the focal sentiment with the coffee cups.  I used navy blue ink for this –  although it looks black in the picture, it’s navy, honest!
    • I placed the card face on my desktop and added coffee rings and spatter using the brown ink used earlier.
    •  I lightly spattered the card face with water, adding additional texture.

    Assembly

    • I glued the black border layer to the card base,  and then centered the card face on top of both.

    Final Thoughts:

    The stencil provides a great backdrop for this fun stamp:  just enough for visual interest without being a distraction.

    Supplies: (and links where possible)

       I have listed which products I have used, and where they may be purchased. It’s a huge marketplace and in most instances, there are multiple sources and many alternatives to choose from.

    Stencil: Quarter Moon,  A Colorful Life Designs

    Waffle Flower Grip Mat, 8.5 x 6.5, Scrapbook.com

    Versamark Embossing Ink: Simon Says Stamp

    Clear Embossing Powder,  Wow,  Simon Says Stamp

    Ink: Stampin’ Up!

    Blending Brushes: Stampin’ Up! 

    Adhesive: Tombow Aqua, Michaels

    Card Base & Card Face: Recollections 110 lb., Michaels

    Do you have comments or thoughts to share on this design?  Drop me a line in the Comments Section below –  I’d love to hear from you!

    You can also use the Comments Section  to be notified when I release new work

    Quarter Moons by A Colorful Life Designs

  • Send Big Love with a Handmade Card

    Send Big Love with a Handmade Card

    Would you like to experiment with a design like this? You’ll find a supply list below, including a link to the stencil I used from A Colorful Life Designs.  Follow the link and use discount code ChrisFan10 to save 10% on your entire order! (Master Creator Bundles are excluded as they already have a 20% discount built in.)

    Let’s get Started:

    Card Base: 5.5 x 8.5, scored and folded at 4.25

    Border Layer: 5.5 x 4.25

    Card Face: 5.5 x 4.25

    Card Face:

    • I put the card face into the stamp positioner and stamped the bunny a couple of times with black Memento ink, centering the image.
    • I coloured her in with alcohol markers  (Memento ink doesn’t react to alcohol, making it perfect for this purpose).
    • I put the card face onto the grip mat and positioned the stencil:  I used pink ink to create the pattern around the bunny –  using more ink/ more pressure around the edges and allowing the ink to fade as I neared the center.
    • I added a rectangular stitched die to the card face, centering carefully.  This die creates a pattern in the paper; \it is not a cutting die.
    • I returned the card face to the stamping platform and added the sentiment with Versafine Onyx.  This is actually one stamp: to create the separation, I had to mask off the appropriate section, and stamp the other.
    • I used a punch on all four corners to create the peek-a-boo pattern.

    Assembly

    • I glued the black border layer to the card base, and then added the card face on top of that.
    • I thought this card needed one final detail,  so I added a clear heart shaped gem to the card face to finish it off.

    Final Thoughts:

    • This bunny is absolutely adorable,  and that sentiment suits perfectly.
    • If I were to re-do this card,  I would position the “sending” a little further to the right –  but by the time I saw the problem on this card it was too late to fix!

    Supplies: (and links where possible)

       I have listed which products I have used, and where they may be purchased. It’s a huge marketplace and in most instances, there are multiple sources and many alternatives to choose from.

    Stencil: Droplet Grid,  A Colorful Life Designs

    Waffle Flower Grip Mat, 8.5 x 6.5, Scrapbook.com

    Stamps:

         Cuddly Girl, Nellie’s Choice, Ecstasy Crafts  (out of stock)

          Sentiment:  Technique Junkies  (out of business)

    Dies: Stitched with Whimsy, Stampin’ Up!  (retired)

    Ink: Stampin’ Up!

    Blending Brushes: Stampin’ Up! 

    Versafine Onyx, Simon Says Stamp

    Memento Ink: Stampin’ Up!

    Alcohol Markers:

         Stampin’ Blends: Stampin’ Up!

         Copics:  Wallacks

    Adhesive: Tombow Aqua, Michaels

    Card Base & Card Face: Accent 100 lb., Amazon

    Do you have comments or thoughts to share on this design?  Drop me a line in the Comments Section below –  I’d love to hear from you!

    You can also use the Comments Section  to be notified when I release new work

    Droplet Grid by A Colorful Life Designs

  • The delightful whimsy of dasies, in a thank you card

    The delightful whimsy of dasies, in a thank you card

    Would you like to experiment with a design like this? You’ll find a supply list below, including a link to the stencil I used from A Colorful Life Designs.  Follow the link and use discount code ChrisFan10 to save 10% on your entire order! (Master Creator Bundles are excluded as they already have a 20% discount built in.)

    Let’s get Started:

    Card Base: 5.5 x 8.5, scored and folded at 4.25

    Black Border Layer: 5.5 x 4.25

    Card Face:  5.25 x 4

    Card Face:

    • I laid the card face onto the Grip Mat and positioned the stencil.
    • I applied school bus yellow ink across the exposed areas.
    • I repositioned the stencil,  turning it  90 degrees,  and applied peach ink across all exposed areas.
    • I used a punch on the corners to create the pattern shown in the image.

    Other:

    • I looked through my sentiment binder and selected one that worked:  I took into account the mood of the design and the size of the sentiment.

    Assembly

    • I glued the black cardstock to the card base,  and then centered the card face on top. 
    • I put the sentiment in place as shown.
    • I scattered three different colours of card bling across the surface:  black,  black with white polka dots and white with black polka dots.

    Final Thoughts:

    The combination of the two colours created some interesting tone depth, and rotating the stencil created an interesting depth in the pattern.

    I love the polka dot card bling,  and the additional whimsy it brings to this card.

    Supplies: (and links where possible)

       I have listed which products I have used, and where they may be purchased. It’s a huge marketplace and in most instances, there are multiple sources and many alternatives to choose from.

    Stencil: Trim Octagon,  A Colorful Life Designs

    Waffle Flower Grip Mat, 8.5 x 6.5, Scrapbook.com

    Ink: Stampin’ Up!

    Blending Brushes: Stampin’ Up! 

    Stamp: Unity Stamp Company (retired)

    Card Bling: A Colorful Life Designs

    Adhesive: Tombow Aqua, Michaels

    Card Base & Card Face: Accent 100 lb., Amazon

    Do you have comments or thoughts to share on this design?  Drop me a line in the Comments Section below –  I’d love to hear from you!

    You can also use the Comments Section  to be notified when I release new work

    Trim Octagon from A Colorful Life Designs