Written In Ink

Category: tips

  • How to Use Stencils for Beautiful Holiday Card Designs

    How to Use Stencils for Beautiful Holiday Card Designs

    Would you like to experiment with a design like this? You’ll find a supply list below, including a link to the stencil I used from A Colorful Life Designs.  Follow the link and use discount code ChrisFan10 to save 10% on your entire order! (Master Creator Bundles are excluded as they already have a 20% discount built in.)

    Let’s get Started:

    Card Base: 5.5 x 8.5, scored and folded at 4.25

    Black Border Layer: 5.5 x 4.25

    Card Face:  5.25 x 4

    Card Face:

    • I laid the card face onto my grip mat and positioned the stencil with the ivy swag where I wanted it.  I used a small blending brush and green ink over this part of the stencil, being careful to avoid ink in other open areas on the stencil.   
    • I moved the stencil and added ivy to other sections of the card face randomly.
    • I wiped the stencil down to remove the green ink.  I added the poinsettias with red ink, switching to the small brush designated for that colour.
    • The stencilling was complete,  but I wanted more detail in the background,  so I added two different backgrounds stamps with light brown ink.

    To use a background stamp:

    It can be difficult to get a good impression with a background stamp – there’s a lot of area to cover. I get good results with this method – I’m quite certain I saw it on Youtube, but cannot remember who to give credit to.

    I lay the stamp on my work surface and ink it up thoroughly, going over it more than once to be certain I’ve got good coverage.

    I lay my card face directly on this, carefully lining up the edges so that it’s straight. I hold it down with one hand to be certain that it doesn’t move.

    I place a piece of copy paper over the card face very carefully, not allowing any movement.

    I run my fingers or palm over the copy paper, switching hands as necessary – one holding everything still and the other transferring ink.

    When I’m satisfied I remove the copy paper and then the card face, careful not to smudge.

    I use the copy paper to keep ink off of my hands – it will inevitably transfer to the card face! (The stamps are larger than the card face, so there is exposed ink.)

    This method allows me to vary pressure or skip over parts of the image if I don’t want solid inking.

    I often use a slightly larger piece of cardstock than I need: if I don’t get it quite straight, I can trim it down and fix that.

    • With the background complete I put the card face into my stamp positioner and added the bakers twine and bow images using Versafine Onyx ink.
    • I used a corner rounder punch on each corner.

    Other:

    • I looked through my sentiment binder and found these wee gift tags which had been created and saved for future use …  it saves so much time to have things like this ready and waiting.

    Assembly

    • I glued the black border layer to the card base, and then centered the card face on top of these.
    • I added the tiny gift tags as shown.

    Final Thoughts:

    I think this card face would have been good with only one background stamp rather than two: if I recreate the design I will try that.

    I was trying for the look of a retro Christmas gift with this card –  not as successfully as hoped,  but it’s a fun card anyway.

    Supplies: (and links where possible)

       I have listed which products I have used, and where they may be purchased. It’s a huge marketplace and in most instances, there are multiple sources and many alternatives to choose from.

    Stencil: Retro Candy Canes,  A Colorful Life Designs

    Waffle Flower Grip Mat, 8.5 x 6.5, Scrapbook.com

    Stamps:

    Rustic Linen,  Altenew

    Woven Stripes,  Altenew

    Handmade Twine Bows, Picket Fence

    Bakers Twine, Picket Fence, Scrapbook.com

    Ink: Stampin’ Up!

    Small Blending Brushes:  Waffle Flower, Scrap n’ Stamp

    Versafine Onyx, Simon Says Stamp

    Adhesive: Tombow Aqua, Michaels

    Cream Card Base & Card Face: Recollections 100 lb.,  Michaels

    Do you have comments or thoughts to share on this design?  Drop me a line in the Comments Section below –  I’d love to hear from you!

    You can also use the Comments Section  to be notified when I release new work.

    Retro Candy Canes by A Colorful Life Designs

  • Master Card Design: Using Stencils for Unique Creations

    Master Card Design: Using Stencils for Unique Creations

    Would you like to experiment with a design like this? You’ll find a supply list below, including a link to the stencils I used from A Colorful Life Designs.  Follow the link and use discount code ChrisFan10 to save 10% on your entire order! (Master Creator Bundles are excluded as they already have a 20% discount built in.)

    Let’s get Started:

    Card Base: 5.5 x 8.5, scored and folded at 4.25

    Card Face:  5 ⅛ x 3 7/8

    Card Face:

    • I laid the card face onto my grip mat and positioned the postage stamp mask, centering it carefully. I inked around the outside edges with a heavy hand and dark blue ink.
    • I placed the corresponding stencil around the mask, then removed the mask (exposing the center of the cardstock while protecting the sectionalready inked).
    • I put the Angular Trees stencil over the Postage Stamp stencil and added the three trees in shades of green, using a smaller brush and masking as necessary to prevent colours from mixing.
    • After removing the Angular Trees stencil, I placed the Tree Edger #5 mask at the top of the opening and added purple ink with a light hand.  Then I added blue ink, pulling it down from the top and in from the sides.  When I removed the mask, I had created a white mountain range and a night sky.
    • Leaving the Postage Stamp stencil in place, I positioned the Tree Line Edger #3 stencil so the bottom of the trees was slightly below the halfway mark. Masking off the Angular trees as necessary, I added blue ink, making the trees very intense at the top but allowing the colour to fade as it moved down the tree.
    • I used a piece of torn paper and a soft hand with the same blue ink to create the look of snow and shadows on the ground.
    • My final stencil was the Christmas Postmark:  I positioned it at an angle over the scene and added it with dark gray ink.
    • I inked up a tiny bird stamp with red ink and positioned it on the snow.
    • I used a light hand and the residual ink on my light blue brush over the white mountain range at the top of the card face – this softened the area, removing the stark contrast.
    • I used a white gel pen to add snow to the scene.

    Assembly

    I glued the card face in the center of the card base.

    Final Thoughts:

    I am so happy with this card:  each step was an experiment and could have gone wrong,  but in this instance everything worked together to create the result I was hoping for.

    Supplies: (and links where possible)

       I have listed which products I have used, and where they may be purchased. It’s a huge marketplace and in most instances, there are multiple sources and many alternatives to choose from.

    Stencils:

    Angular Trees,  A Colorful Life Designs

             Tree Line Edger #5, A Colorful Life Designs

    Tree Line Edger #3, A Colorful Life Designs

    Marvellous Masks Postage Stamps: A Colorful Life Designs

    Christmas Postmark: A Colorful Life Designs

    Waffle Flower Grip Mat, 8.5 x 6.5, Scrapbook.com

    White Gel Pen: Arteza, Amazon

    Ink: Stampin’ Up!

    Blending Brushes: Stampin’ Up! 

    Blending Brushes:  Waffle Flower Sampler Pack, Scrap & Stamp

    Adhesive: Tombow Aqua, Michaels

    Card Base & Card Face: Accent 100 lb., Amazon

    Do you have comments or thoughts to share on this design?  Drop me a line in the Comments Section below –  I’d love to hear from you!

    You can also use the Comments Section  to be notified when I release new work.

    Angular Trees by A Colorful Life Designs

    Tree Line Edger #5 by A Colorful Life Designs

    Tree Line Edger #3 by A Colorful Life Designs

    Marvellous Masks Postage Stamp by A Colorful Life Designs

    Christmas Postmark by A Colorful Life Designs

  • Crafting Beautiful Cards: Foiling with Stencils

    Crafting Beautiful Cards: Foiling with Stencils

    make a card that makes them say “WOW!”

    Would you like to experiment with a design like this? You’ll find a supply list below, including a link to the stencil I used from A Colorful Life Designs.  Follow the link and use discount code ChrisFan10 to save 10% on your entire order! (Master Creator Bundles are excluded as they already have a 20% discount built in.)

    Let’s get Started:

    Card Base: 5.5 x 8.5, scored and folded at 4.25

    Card Face:  5.25 x 4

    When I work with Duo Gel or embossing pastes I don’t use my Grip Mat –  purely a personal preference in the interest of protecting the surface of the mat.

    Card Face:

    • I put my card face on a sheet of scrap paper, positioned the stencil and fastened it in place with Mint Tape.  
    • I spread Duo Gel over the entire surface and then carefully removed the stencil.  The stencil is immediately immersed in water to prevent the gel from drying on the surface.
    • I put the card face aside to dry.  Duo Gel is dry when it is completely clear –  I usually leave it for two or three hours before coming back to it.
    • I don’t have running water near my craft room, so when working with this gel or pastes I have a container of water on the floor beside me so I can immerse the stencils immediately.  I usually do several of these at a time when I settle down to work with either gel or paste.
    • Once the card face had dried I laid a piece of transfer foil on top and ran it through the Big Shot.
    • The pressure from the machine caused the pretty part of the foil to stick to the Duo Gel,  so when I removed the sheet,  the silver stayed behind on the stencilled pattern.

    Other:

    • I used a scrap of heavy white cardstock to cut out the snowflake.
    • I looked through my sentiment binder and selected one that would work for this card.

    Assembly

    • I put dimensional foam on the back of my card face,  and then centered it on the card base.
    • I glued the snowflake to the card face as shown. (I allowed a little extra time for the liquid glue to grab on the foiled surface.)
    • I glued the sentiment across the center of the snowflake.
    • I added rhinestones to the top and bottom of the snowflake.

    Final Thoughts:

    If you’ve never tried foiling with stencils and duo gel,  I recommend it!  It’s a lot of fun  with gorgeous results –  just be certain to buy transfer foil for this purpose and you’re good to go.

    This was a really fast card to make,  but it was time consuming to figure out how to use the panel.  The foiling is gorgeous, and really packs a punch.  I tried several ideas, put it aside for a while, tried a few more …. And finally decided on the design that you see in the photo.

    Supplies: (and links where possible)

       I have listed which products I have used, and where they may be purchased. It’s a huge marketplace and in most instances, there are multiple sources and many alternatives to choose from.

    Stencil: Snowflake Net, A Colorful Life Designs

    Waffle Flower Grip Mat, 8.5 x 6.5, Scrapbook.com

    Versamark Embossing Ink: Simon Says Stamp

    Clear Embossing Powder,  Wow,  Simon Says Stamp

    Duo Gel: Deco Foil,  R& R Scrapbooking

    Transfer Foil: Shattered Glass, Deco Foil, R&R Scrapbooking

    Die: Recollections, Michaels  (retired)

    Ink: Stampin’ Up!

    Adhesive: Tombow Aqua, Michaels

    Card Base & Card Face: Accent 100 lb., Amazon

    Do you have comments or thoughts to share on this design?  Drop me a line in the Comments Section below –  I’d love to hear from you!

    You can also use the Comments Section  to be notified when I release new work.

    Snowflake Net by A Colorful Life Designs

  • How to Make a Gorgeous Card with Dotted Wreath Stencil

    How to Make a Gorgeous Card with Dotted Wreath Stencil

    Would you like to experiment with a design like this? You’ll find a supply list below, including a link to the stencil I used from A Colorful Life Designs.  Follow the link and use discount code ChrisFan10 to save 10% on your entire order! (Master Creator Bundles are excluded as they already have a 20% discount built in.)

    Let’s get Started:

    Card Base: 5.5 x 8.5, scored and folded at 4.25

    Border Layer: 5.5 x 4.25

    Cranberry Card Face: 5.25 x 5.25

    Card Face:

    • I laid my card face on a piece of scrap paper and positioned the stencil.  I applied green embossing paste through the stencil, then removed the stencil very carefully so I didn’t smudge the paste.
    • The stencil went into water immediately,  and the card face was put aside to dry.
    • Once dry the card face was cut in half, and became 5.25 x 2.75.
    • I also cut ⅛” off the top and bottom of this piece.

    Other:

    • I glued the card face (or rather, half of it!)  to the kraft border layer on the left, ensuring equal spacing on the top, bottom and left-hand sides.
    • I placed this newly created combination into my stamp positioner and stamped the reindeer image with Versamark embossing ink.  I stamped several times to get a good impression.
    • I removed this from the stamp positioner, added copper embossing powder, and set it with my heat gun.
    • I drew a narrow line snugly against the right-hand edge of the cranberry cardstock,  added copper embossing powder and set it with my heat gun.  

    This was necessary because of the raised cranberry layer:  no ink transferred immediately beside it,  so I used the embossing pen to draw a line and fill in the narrow gap.

    • I stamped the sentiment on a scrap of cardstock in cranberry ink and cut it with a die.
    • I die cut a tiny bow out of the same cardstock.

    Assembly:

    • I glued the sentiment to the card face, allowing part of it to hang off the left-hand edge.  I cut this off flush.
    • I glued the card face to the card base.
    • I added the tiny bow to the reindeer as shown.

    Final Thoughts:

    I wasn’t at all sure about this design when I tried it,  but I quite like it in the end.

    This is such a great stencil to play with –  and I still  have half of it to work into a card.

    Supplies: (and links where possible)

       I have listed which products I have used, and where they may be purchased. It’s a huge marketplace and in most instances, there are multiple sources and many alternatives to choose from.

    Stencil: Dotted Wreath : A Colorful Life Designs

    Waffle Flower Grip Mat, 8.5 x 6.5, Scrapbook.com

    Versamark Embossing Ink:  Ecstasy Crafts

    Embossing Pen: Versamark, Ecstasy Crafts

    Copper Embossing Powder: Wow,  R&R Scrapbooking

    Embossing Paste: Later Gater, Simon Hurley,  R&R Scrapbooking

    Stamps:  Cheerful Prancing, Unity Stamps  (retired,  but there are still similar stamps     available!)

    Dies: 

         Sentiment: Stampin’ Up! (retired)

         Bow Topper:  Scrapbook.com

    Ink: Stampin’ Up!

    Adhesive: Tombow Aqua, Michaels

    Card Base & Card Face: Accent 100 lb., Amazon

    Do you have comments or thoughts to share on this design?  Drop me a line in the Comments Section below –  I’d love to hear from you!

    You can also use the Comments Section  to be notified when I release new work.

    Dotted Wreath by A Colorful Life Designs

  • Make a Christmas card with a masculine twist

    Make a Christmas card with a masculine twist

    Would you like to experiment with a design like this? You’ll find a supply list below, including a link to the stencil I used from A Colorful Life Designs.  Follow the link and use discount code ChrisFan10 to save 10% on your entire order! (Master Creator Bundles are excluded as they already have a 20% discount built in.)

    Let’s get Started:

    Card Base: 5.5 x 8.5, scored and folded at 4.25

    Black Border Layer: 5.5 x  4.25

    Card Face:  5.5 x 4

    Scrap of Kraft Cardstock 3 x 2

    Small Black border layer: 3 x 2 3/16

    Black Strips:  4 x 3/19  (three of them)

    This stencil has long strands which are unsecured between the top and bottom – a recipe for unwanted movement while applying ink. Before starting I sprayed the back of the stencil with Pixie Spray, and waited about 30 seconds before proceeding.

    Card Face:

    • I laid the card face on my Grip Mat and positioned the stencil.  I applied metallic gold ink across the exposed areas.

    Other:

    • I placed the scrap of kraft cardstock into my stamp positioner and added the tree with Versafine Onyx.  I stamped a couple of times to ensure a very bold image.
    • Once the ink had dried,  I placed this in an embossing folder and ran it through the Big Shot.

    Assembly

    • I glued the black border to the card base.
    • I glued the card face to the border layer, centering vertically.
    • I glued the three narrow strips to the card face, evenly spaced.
    • I glued the embossed/stamped layer to the smaller black border, centering vertically.
    • I put dimensional foam on the back of this smaller piece,  and positioned it in the center of the card face.

    Final Thoughts:

    This is clearly a masculine card:  this is determined by the shapes and colours used.  There is nothing in the design or the focal image that indicates that this has to be for a male… and yet that is the only real choice.

    Supplies: (and links where possible)

       I have listed which products I have used, and where they may be purchased. It’s a huge marketplace and in most instances, there are multiple sources and many alternatives to choose from.

    Stencil: Drizzled Lines,  A Colorful Life Designs

    Waffle Flower Grip Mat, 8.5 x 6.5, Scrapbook.com

    Stamps:  Christmas Tree of Hope, Joy and Love, Unity Stamps (retired)

    Lisa Horton Metallic Gold Ink: Glitter & Ink

    Blending Brushes: Stampin’ Up! 

    Versafine Onyx, Simon Says Stamp

    Adhesive: Tombow Aqua, Michaels

    Card Base & Card Face: Accent 100 lb., Amazon

    Do you have comments or thoughts to share on this design?  Drop me a line in the Comments Section below –  I’d love to hear from you!

    You can also use the Comments Section  to be notified when I release new work.

    Drizzled Lines by A Colorful Life Designs

  • All I need for Christmas is endless coffee, and a great card design

    All I need for Christmas is endless coffee, and a great card design

    Alternate title: A guide to surviving errors and still ending up with a card!

    Would you like to experiment with a design like this? You’ll find a supply list below, including a link to the stencils I used from A Colorful Life Designs.  Follow the link and use discount code ChrisFan10 to save 10% on your entire order! (Master Creator Bundles are excluded as they already have a 20% discount built in.)

    Let’s get Started:

    Card Base: 5.5 x 8.5, scored and folded at 4.25

    Card Face:  5.25 x 4

    Card Face:

    • Using Memento black ink, I stamped the image in the upper right of the card face, and then coloured it with alcohol markers.
    • I placed the card face down on the Grip Mat and positioned the coffee cup portion of the stencil in the lower-left corner.  I masked off open areas on the stencil near the mug, then used red ink over the exposed area.
    • When I removed the stencil, I was dismayed to see that I had been too energetic with my brush between the mug and the handle—and I had ink between the two, instead of a lovely, clean page.  What to do?
    • I cut very carefully along the outline of the mug, removing it completely from the card face.  Then I laid it on a scrap piece of cardstock and traced it.  I carefully cut this piece out and then tested it in the opening on the card face.  Once I saw that I had a good fit, I glued the card face to a piece of scrap copy paper (cut down to 5.25 x 4”)  and glued the blank “mug” into the opening.
    • I used my snips to remove the paper between the mug and the handle, cutting carefully along the lines.   Once that was done, I was able to glue that piece back in place directly over the blank.
    •  I repositioned the stencil and placed the sentiment I wanted to use in the upper-left corner, then applied black ink to the open areas.
    • I put the other stencil in place:  I used yellow ink and a light hand to create the pattern around the mouse.

    Rather than grab my yellow ink pad,  I simply used the residual ink on the yellow brush.  Because I only wanted a subtle background, this worked well.  I learned this tip from my friend on YouTube – check out Amy’s Wares for some great tips.

    • I outlined the mug with silver gel pen:  while I was outlining the handle, the pen slipped and suddenly I had an unplanned streak of silver ink …. I dealt with that by adding additional lines to the handle, creating stripes.   I decided to add dots to the rest of the mug just for fun.
    • I ran the edges of the card face over my red ink pad., creating definition.

    Assembly

    • I glued the card face to the card base, centering all sides.

    Final Thoughts:

    I had coloured the mouse and lights (so adorable!) and didn’t know what I wanted to do next. A random hunt through my stencil binder resulted in my tripping over the Christmas Coffee stencil and a plan was born.  Serendipity is a wonderful thing!

    Supplies: (and links where possible)

       I have listed which products I have used, and where they may be purchased. It’s a huge marketplace and in most instances, there are multiple sources and many alternatives to choose from.

    Stencil:

    Christmas Coffee Stencil:  A Colorful Life Designs

    Connect the Dots,  A Colorful Life Designs

    Waffle Flower Grip Mat, 8.5 x 6.5, Scrapbook.com

    Stamps: Merry and Bright, House Mouse,  Spellbinders (retired)

    Ink: Stampin’ Up!

    Blending Brushes: Stampin’ Up! 

    Versafine Onyx, Simon Says Stamp

    Memento Ink: Stampin’ Up!

    Alcohol Markers:

         Stampin’ Blends: Stampin’ Up!

         Copics:  Wallacks

    Adhesive: Tombow Aqua, Michaels

    Card Base & Card Face: Accent 100 lb., Amazon

    Do you have comments or thoughts to share on this design?  Drop me a line in the Comments Section below –  I’d love to hear from you!

    You can also use the Comments Section  to be notified when I release new work.

    Connect the Dots by A Colorful Life Designs

    Christmas Coffee by A Colorful Life Designs

  • Create Your Own Snowman Card with Easy Techniques

    Create Your Own Snowman Card with Easy Techniques

    There is nothing this wee fella loves more than a good snowfall.

    Would you like to experiment with a design like this? You’ll find a supply list below, including a link to the stencil I used from A Colorful Life Designs.  Follow the link and use discount code ChrisFan10 to save 10% on your entire order! (Master Creator Bundles are excluded as they already have a 20% discount built in.)

    Let’s get Started:

    Card Base: 5.5 x 8.5, scored and folded at 4.25

    Card Face: 5.5 x 4.25 (before die cutting)

    White Cardstock for die cutting:  4 x 4

    Card Face:

    • I laid the card face on my Grip Mat and positioned the stencil.
    • I used ink that matched the cardstock across all open areas,  using a heavy hand to get a saturated result.
    • I removed the stencil and sprinkled clear embossing powder over the wet ink, immediately setting this with my heat gun.
    • I used a deckled rectangle die to cut the card face down to approximately 5.25 x 4”.

    Other:

    • I positioned the square die on the smaller piece of white cardstock and ran it through my Big Shot.
    • I looked through my Ready to Go binder and selected the wee snowman, which had already been coloured and cut out.
    • I checked my sentiment binder and selected one that worked with the design.

    Assembly

    • I glued the card face to the card base.
    • I centered the die-cut square on the card face and glued it down.
    • I added the snowman towards the bottom right.
    • I added the sentiment across the snowman.

    Final Thoughts:

    This is a fun and festive card to celebrate the season.

    When I cut out the snowman  I cut tight along the outer lines and cut off the arms  (they are so thin and delicate that  cutting them out would be very time-consuming.)   I rectified this by using a fineliner to draw them back on once I had the snowman glued to the die cut square.  I got this tip from a Jennifer McGuire video, and use it often.

    Supplies: (and links where possible)

       I have listed which products I have used, and where they may be purchased. It’s a huge marketplace and in most instances, there are multiple sources and many alternatives to choose from.

    Stencil: Christmas Words, A Colorful Life Designs

    Waffle Flower Grip Mat, 8.5 x 6.5, Scrapbook.com

    Versamark Embossing Ink: Simon Says Stamp

    Clear Embossing Powder,  Wow,  Simon Says Stamp

    Stamps: A Colorful Life Designs (retired)

    Dies: Your Next Stamp  (no longer in business)

    Ink: Stampin’ Up!

    Blending Brushes: Stampin’ Up! 

    Versafine Onyx, Simon Says Stamp

    Memento Ink: Stampin’ Up!

    Alcohol Markers:

         Stampin’ Blends: Stampin’ Up!

         Copics:  Wallacks

    Adhesive: Tombow Aqua, Michaels

    Card Base & Card Face: Accent 100 lb., Amazon

    Do you have comments or thoughts to share on this design?  Drop me a line in the Comments Section below –  I’d love to hear from you!

    You can also use the Comments Section  to be notified when I release new work

    Christmas Words by A Colorful Life Designs

  • Is “Fast & Easy” your cardmaking jam? Stencils for the win!

    Is “Fast & Easy” your cardmaking jam? Stencils for the win!

    Two stencils and a couple of pre-coloured & cut elements … easy peasy.

    Would you like to experiment with a design like this? You’ll find a supply list below, including a link to the stencils I used from A Colorful Life Designs.  Follow the link and use discount code ChrisFan10 to save 10% on your entire order! (Master Creator Bundles are excluded as they already have a 20% discount built in.)

    Let’s get Started:

    Card Base: 5.5 x 8.5, scored and folded at 4.25

    Card Face:  5.25 x 4

    Card Face:

    • I laid the card face onto my Grip Mat and then positioned the Fine Snowflakes stencil:  I applied white pigment ink on all exposed areas, using a heavy hand to ensure good saturation.
    • After removing this stencil, I replaced it with the Tree Edger #1 stencil, positioning this approximately half way down the page (horizonally).
    • I used the same white pigment ink to create a tree line, with a lighter hand than I had used for the snowflakes.
    • I moved the stencil down and repeated this step, to create a second tree line directly below the first.
    • I used a white gel pen to add dots of snow to the night sky.

    Other:

    • The wee house and tree were already stamped, coloured and cut out,  waiting in my Ready to Go binder,  as was the sentiment.  I pulled all three out for use on this card.

    Assembly

    • I glued the card face to the card base, centering on all sides.
    • I glued the house in the middle of the card,  just a bit up from the bottom. 
    • I added the tree as shown, overlapping the house slightly.
    • I added the sentiment to the upper left.
    • I added rhinestones to the center of each snowflake.

    Final Thoughts:

    This is a very outside-the-box card for me: both design wise and as a Christmas card.  None the less,  I like it!

    Supplies: (and links where possible)

       I have listed which products I have used, and where they may be purchased. It’s a huge marketplace and in most instances, there are multiple sources and many alternatives to choose from.

    Stencil:

    Fine Snowflakes:  A Colorful Life Designs

    Christmas Tree Edger #1, A Colorful Life Designs

    Waffle Flower Grip Mat, 8.5 x 6.5, Scrapbook.com

    Versamark Embossing Ink: Simon Says Stamp

    White Gel Pen: Arteza, Amazon

    Clear Embossing Powder,  Wow,  Simon Says Stamp

    Stamps & Coordinating Dies:  Stampin’ Up!  (retired)

    Ink: Stampin’ Up!

    Blending Brushes: Stampin’ Up! 

    Versafine Onyx, Simon Says Stamp

    Memento Ink: Stampin’ Up!

    Alcohol Markers:

         Stampin’ Blends: Stampin’ Up!

         Copics:  Wallacks

    Adhesive: Tombow Aqua, Michaels

    Card Base & Card Face: Accent 100 lb., Amazon

    Do you have comments or thoughts to share on this design?  Drop me a line in the Comments Section below –  I’d love to hear from you!

    You can also use the Comments Section  to be notified when I release new work.

    Fine Snowflakes by A Colorful Life Designs

    Christmas Tree Edger #1, by A Colorful Life Designs

  • Making Cards or Making Mischief ? sometimes you can have both!

    Making Cards or Making Mischief ? sometimes you can have both!

    Peaceful & calm outside, but inside? Mischief and mayhem!

    Would you like to experiment with a design like this? You’ll find a supply list below, including a link to the stencils I used from A Colorful Life Designs.  Follow the link and use discount code ChrisFan10 to save 10% on your entire order! (Master Creator Bundles are excluded as they already have a 20% discount built in.)

    Let’s get Started:

    Card Base: 5.5 x 8.5, scored and folded at 4.25

    Card Face: 5.5 x 4.25

    Card Face:

    • I stamped the trees roughly in the center of the paper using Memento black ink. I coloured the trees with alcohol markers.
    • I placed the card face onto the grip mat, and then added one of the Arches stencils,  centering the opening around the trees.  
    • Using a light hand, I added blue ink in the open areas.
    • I added snow to the scene by spattering white metallic watercolour into the opening, directly over the image.
    • I removed the Arches stencil and placed the Floor Perspective stencil towards the bottom of the card face, immediately under the window.   I used brown ink across the open areas.   I wanted to continue the floor pattern across the entire width of the card face, so I moved the stencil to the right and tried to line up the pattern before applying ink again. (you can see that I was not entirely successful!)  I repeated this on the left side of the card face, extending the tiled floor there as well.
    • I protected the window image created earlier by adding the corresponding mask to cover the inked area completely.  I used a loop of low-tack tape on the back of the mask to keep it in place.  
    • Using a strip of low tack tape to mask the edge of the floor,  I added yellow ink to the top of the card face around the window.
    • I put the Sparkles stencil in place and added the same yellow ink across the exposed areas, creating a tone on tone pattern.
    • I added light grey ink to the border area between the floor and wall to create shadow.
    • I put the mask back in place over the window and traced around this with a black marker.   I used a ruler and the same black marker to create the window panes within this border.

    Other:

    • I had previously stamped and coloured the image of the dog with the string of lights:  I fussy cut around the image.  To give this just a bit more “pop”  I used a clear medium over the Christmas bulbs –  this added a bit of depth and a lot of shine.
    • I looked through my sentiment binder and found one that worked perfectly with the scene.

    Assembly

    • I glued the card face to the card base.
    • I glued the dog in place.
    • I added the sentiment across the center of the trees.

    Final Thoughts:

    Supplies: (and links where possible)

    This card involved a lot of design on the fly …. I started the process with the idea of using the Arches stencil, and no real plan. It created itself as I went along (something that happens often in my craftroom), and once I had added the floor, wallpaper and outlined the window I thought the card was done.

    When I went back and had another look the following week, I realized it still needed “something”. So I looked through my pre-coloured images and discovered the perfect final touch.

    I love it when serendipity strikes!

    Supplies:

       I have listed which products I have used, and where they may be purchased. It’s a huge marketplace and in most instances, there are multiple sources and many alternatives to choose from.

    Stencils:

    Marvellous Masks Arches,  A Colorful Life Designs

    Floor Perspective, A Colorful Life Designs

    Sparkles, A Colorful Life Designs

    Waffle Flower Grip Mat, 8.5 x 6.5, Scrapbook.com

    Versamark Embossing Ink: Simon Says Stamp

    Clear Embossing Powder,  Wow,  Simon Says Stamp

    Stamps: 

    Dog:  Christmas Fun,  Penny Black,  Amazon

    Trees: Impression Obsession (no longer in business)

    Ink: Stampin’ Up!

    Blending Brushes: Stampin’ Up! 

    Versafine Onyx, Simon Says Stamp

    Memento Ink: Stampin’ Up!

    Alcohol Markers:

         Stampin’ Blends: Stampin’ Up!

         Copics:  Wallacks

    Adhesive: Tombow Aqua, Michaels

    Card Base & Card Face: Accent 100 lb., Amazon

    Do you have comments or thoughts to share on this design?  Drop me a line in the Comments Section below –  I’d love to hear from you!

    You can also use the Comments Section  to be notified when I release new work

    Marvellous Masks Arches by A Colorful Life Designs

    Sparkles by A Colorful Life Designs

    Floor Perspective by A Colorful Life Designs

  • Create Beautiful Christmas Cards with Stencils

    Create Beautiful Christmas Cards with Stencils

    Would you like to experiment with a design like this? You’ll find a supply list below, including a link to the stencils I used from A Colorful Life Designs.  Follow the link and use discount code ChrisFan10 to save 10% on your entire order! (Master Creator Bundles are excluded as they already have a 20% discount built in.)

    Let’s get Started:

    Card Base: 5.5 x 8.5, scored and folded at 4.25

    Border Layer: 5.25 x 4

    Card Face:  5 ⅛ x 3 7/8

    Card Face:

    • I stamped the girl and the tree using black Memento ink, and then coloured them in using alcohol markers.
    • I laid the card face onto my Grip Mat and positioned the Diagonal Weave stencil.  I used light gray ink and a soft hand to add this pattern to the background, carefully avoiding the two coloured images.
    • I wasn’t entirely satisfied at this point:  after mulling over my options I pulled out the Glittering Hearts stencil and added that to the background as well, using the same gray ink, and once again a very light hand.  This provided enough detail in the background to support the two images, while the soft colour didn’t compete with them for attention.
    • I placed the card face into my stamp positioner and added the sentiment in red ink, stamping a few times to get the saturation I wanted.

    Assembly

    • I glued the red border layer to the card base, and then added the card face on top, centering both of these layers carefully.
    • I added a small, textured red heart above the sentiment.

    Final Thoughts:

    I am happy with this card –  the two stencils worked together perfectly to fill in that background, providing just enough visual interest.

    Supplies: (and links where possible)

       I have listed which products I have used, and where they may be purchased. It’s a huge marketplace and in most instances, there are multiple sources and many alternatives to choose from.

    Stencils

    Diagonal Weave,  A Colorful Life Designs

    Glittering Hearts, A Colorful Life Designs:

    Waffle Flower Grip Mat, 8.5 x 6.5, Scrapbook.com

    Stamps:  Impression Obsession  (no longer in business)

    Ink: Stampin’ Up!

    Blending Brushes: Stampin’ Up! 

    Memento Ink: Stampin’ Up!

    Alcohol Markers:

         Stampin’ Blends: Stampin’ Up!

         Copics:  Wallacks

    Adhesive: Tombow Aqua, Michaels

    Card Base & Card Face: Accent 100 lb., Amazon

    Do you have comments or thoughts to share on this design?  Drop me a line in the Comments Section below –  I’d love to hear from you!

    You can also use the Comments Section  to be notified when I release new work

    Diagonal Weave by a Colorful Life Designs

    Glittering Hearts by a Colorful Life Designs